Anti Virus Hospital 3 Layers Non Woven Mask Machine
Anti Virus Hospital Disposable 3 Layers Non Woven Mask
Machine Full Automatic 14 KW ALT - AUTO 175 - 3
Automatic flat medical mask production line :
mask blank making, earloop welding,nose clip setting ,all functions in one
It is the auto equipment which is used to the product of face masks,It suitable for the material of non woven fabric, activated carbon and filter material from 1-5 layers. The face mask machine will finish all the processing from the feeding to nose-clip fixing, edge sealing, cutting the finished products.
According to the different materials you use, the finished products can reach the standards as N95, FFP2, etc.This face mask machine has features as stable performance, high productivity, low error rate and easy operation, etc.
| Size |
6800mm(L)×3600mm(W)×1900mm(H) |
| Mask specification |
175*95mm |
| Production efficiency |
100-120PCS/min |
| Qualification rate |
98-99% |
| Failure rate |
2% |
| Weight |
≤2100kg, ground load bearing > 300kg |
| Working power |
220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
| Compressed air |
0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
| Operating environment |
temperature 10 ~ 35 ºC, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000). |
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the finished product
Auto anti virus hospital mask making machine features:
1. Ultrasonic welding technology, ensure masks nice looking & hygienic
2. From raw materials loading ,nose clip setting to earloop welding,all function in one,fully automatic
3. Whole machine adopt aluminum alloy structure, solid & stainless
4. PLC control,drive by servo ,ensure high speed&stale working
